Smart PV Controller Specs_solar Inverter Specs | FusionSolar solar.huawei.com

Cancel

Search History

delete delete done

Recommendations

FusionSolar Global / English

Asia Pacific

Latin America

Middle East & Africa

Input

Rated Input DC power¹

1100 W

1300 W

Max. input voltage

125 V

MPPT operating voltage range

12.5 - 105 V

Max. short-circuit current (Isc)

20 A

Max. efficiency

99.5%

Weighted efficiency

99.0%

Overvoltage category

Output

Max. output voltage

80 V

Max. output current

22 A

Output bypass²

Yes

Shutdown output voltage per optimizer³

1 V

Standards Compliance

Safety

IEC62109-1 (class II safety)

RoHS

Yes

General Data

Dimension (W x H x D)

149 mm x 104 mm x 49 mm (5.9 in. x 4.1 in. x 1.9 in.)

Weight (including cables)

1.0 kg (2.2 lb.)

Installation part (optional)

PV Module Frame Plate / T-shaped Bolt⁴

Input connector

Staubli MC4

Input wire length

0.1 m (short input cable version)⁵

Output connector

Staubli MC4

Output wire length

0.1 m (+), 5.1 m (-) (short input cable version)⁵

Operating temperature / humidity range

-40°C to +85°C⁶ / 0% – 100% RH

Degree of protection

IP68

Technical Specification

Technical specification

SUN5000-150K-MG0

Efficiency

Max. efficiency

98.66% @ 380 V，98.8% @ 480 V

European efficiency

98.2%

Input

Max. input voltage

1,100 V

Max. short circuit current

66 A

Operating voltage range

200 V ~ 1,000 V

Max. input number

Output

Nominal AC active power

150,000 W

Max. AC apparent power

165,000 W

Max. AC active power (cosφ=1)

165,000 W

Nominal output voltage

380 V / 400 V / 480 Vac

Rated AC grid frequency

50 Hz / 60 Hz

Nominal output current

227.9 A @380 V, 216.5 A @400 V, 180.4A @480Vac

Max. output current

253.2 A @380 V, 240.5 A @400 V, 200.5A @480Vac

Adjustable power factor range

0.8 leading... 0.8 lagging

alternating current THDi

＜1%

Protection

Anti-islanding protection

Yes

AC overcurrent protection

Yes

DC surge arrester

Type II

AC surge arrester

Type II

DC insulation resistance detection

Yes

Residual current monitoring unit

Yes

Smart string level disconnector

Yes

Arc fault protection

Yes

Smart connector temperature detector

Yes

PID recovery

Yes

PV ground-fault protection

Yes

Communication

Display

LED indicators; WLAN adaptor + FusionSolar APP

RS485 / USB

Yes

Smart Dongle-4G

Smart Dongle – 4G / WLAN (Optional)

Monitoring BUS (MBUS)

Yes ( Isolation Transformer Required )

General Data

Dimensions (W x H x D)

1,000 x 710 x 395 mm

Weight (with mounting plate)

102 kg

Operating temperature range

-25°C ~ 60°C

Cooling method

Smart Air Cooling

Max. operating altitude

4,000 m (13,123 ft.)

Relative humidity

0 ~ 100%

DC connector

Amphenol HH4

AC connector

Waterproof Connector + OT/DT Terminal

Protection degree

IP66

Standard Compliance (More Available Upon Request)

Certificate

EN 62109-1/-2, IEC 62109-1/-2, IEC 62116, IEC 61727, IEC 60068, IEC 61683

Grid connection standards

VDE-AR-N4105, EN 50549-1, EN 50549-2, RD 661, RD 1699, C10/11

String Configuration (Full Optimizer Configuration)7/8/9

SUN5000-150KTL-MG0

* MERC-1100/1300W-P support full optimizer configuration only

Minimum optimizers per string

Maximum optimizers per string

Maximum DC power per string

20,000 W

*1 The maximum power of PV module at STC shall NOT exceed the “Rated input DC power” of MERC -1100/1300W-P. PV Modules with up to +5% power tolerance are allowed.

*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.

*3 When the MERC -1100/1300W-P is disconnected from inverter or when the inverter is off, its output voltage will be 1 V.

*4 It is for PV module frame/extruded aluminum profile racking system installation.

*5 Pay attention to PV module wire length. To match PV modules with a split junction box and short output wire, the long-input-cable version (input wire: 1.3 m(+/-); output wire 0.1 m(+) / 2.9 m (-)) of MERC -1100/1300W-P is available upon request.

*6 When the operating temperature of the MERC -1100/1300W-P reaches 70 ℃ to 85 ℃, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without any damage.

*7 Each PV module under the same inverter must be equipped with a MERC -1100/1300W-P.

*8 SUN2000-450W-P2/600W-P and MERC -1100/1300W-P can NOT be used in mixture under the same Smart Energy / PV controller

*9 It is recommended that strings under the same inverter have an equal capacity. If it is not feasible, the capacity difference between strings under the same inverter must not exceed 2 kW. Otherwise, the energy yield will be reduced

*10 This datasheet only shows Preliminary Version, the information may change. Please contact with HW local supplier for the latest version

Smart PV Controller Specs_solar Inverter Specs | FusionSolar solar.huawei.com

SUN5000 Series Solution