Smart Module Optimizer Specs_Power Optimizer Specs

Cancel

Search History

delete delete done

Recommendations

FusionSolar Global / English

Asia Pacific

Latin America

Middle East & Africa

Input

Rated input DC power¹

450 w

600 w

Absolute max. input voltage

80 v

MPPT operating voltage range

10 - 80 V

Max. short-circuit current (Isc)

14.5 A

Max. efficiency

99.5%

Weighted efficiency

99.0%

Overvoltage category

Output

Max. output voltage

80 v

Max. output current

15 A

Output bypass²

Yes

Output voltage during standby³

0 v

Output impedance during standby

1 kΩ ± 10%

Communication

Communication protocol

MBUS

Standards Compliance

Safety

IEC62109-1 (class II safety)

RoHS

Yes

Fire Safety

VDE-AR-E 2100-712:2018-12

General Specifications

Dimensions (W x H x D)

75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.)

Weight (including cables)

0.6 kg (1.3 lb.)

Installation kit (optional)

Frame mounting bracket / T-shaped bolt⁴

Input connector

Staubli MC4

Input wire length

0.15 m (0.49 ft.)

Output connector

Staubli MC4

Output wire length

1.3 m (4.3 ft.)

Operating temperature / humidity range

-40 °C to +85 °C ⁵ /0% - 100%

IP rating

IP68

Compatible inverters

SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0, SUN2000-5/6/8/10/12K-MAP0 SUN2000-12K/15K/17K/20K/25K-MB0, SUN2000-8K/10K-LC0, SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5, SUN2000-30K/36K/40K-M3

PV System Design6

PV System Design⁶

SUN2000-2~6KTL-L1

SUN5000-17/25K-MB0

SUN5000-8/12K-MAP0

SUN2000-3~10KTL-M1

SUN2000-5/6/8/10/12K-MAP0

SUN2000-12~25KTL-M5

SUN2000-12~25K-MB0

SUN2000-30K/36K/40K-M3

Min. string length (power optimizers)

Max. string length (power optimizers)

Max. DC power per string

6000 W

12,000 W

SUN2000-3~10KTL-M1

SUN2000-5/6/8/10/12K-MAP0

SUN2000-12~25KTL-M5

SUN2000-12~25K-MB0

SUN2000-30K/36K/40K-M3

*1 The maximum power of PV module at STC shall NOT exceed the “Rated Input DC Power” of the power optimizer. PV modules with up to +5% power tolerance are allowed.

*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.

*3 Once the power optimizer stops working, its output voltage is reduced to 0 V.

*4 It is for PV module frame/extruded aluminum profile racking system installation.

*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without causing any damage.

*6 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy / PV Controller

*7 Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.

Smart Module Optimizer Specs_Power Optimizer Specs | Huawei FusionSolar

Smart Module Controller