Smart Module Optimizer Specs_Power Optimizer Specs

Cancel

Search History

delete delete done

Recommendations

FusionSolar Global / English

Asia Pacific

Latin America

Middle East & Africa

Input

Rated input DC power¹

1100 W

1300 W

Absolute max. input voltage

125 V

MPPT operating voltage range

12.5 - 105 V

Max. short-circuit current (Isc)

20 A

Max. efficiency

99.5%

Weighted efficiency

99.0%

Overvoltage category

Output

Max. output voltage

80 V

Max. output current

22 A

Output bypass²

Yes

Safety output voltage³

1 V

Standards Compliance

Safety

IEC62109-1 (class II safety)

RoHS

Yes

General Specification

Dimensions (W x H x D)

149 mm x 104 mm x 48.8 mm (5.9 in. x 4.1 in. x 1.9 in.)

Weight (including wires)

1.0 kg (2.2 lb.)

Installation kit (optional)

PV Module Frame Plate/T-shaped Bolt⁴

Input connector

Staubli MC4

Input wire length

0.1 m (+/-) (short-input-cable version)⁵

Output connector

Staubli MC4

Output wire length

0.1 m (+), 5.1 m (-) (short-input-cable version)⁵

Operating temperature

–40 °C to +85 °C⁶

Relative humidity

0% - 100%

IP rating

IP68

Compatible inverters

SUN2000-12-25K-MB0, SUN2000-12-25KTL-M5, SUN2000-30-40KTL-M3, SUN2000-50KTL-M3, SUN5000-150K-MG0

PV System Design7 / 8 / 9

PV System Design^{7 / 8 / 9}

SUN2000- 12~25K-MB0

SUN2000- 12~25KTL-M5

SUN2000- 30~40KTL-M3

SUN2000- 50KTL-M3

SUN5000-150K-MG0

Min. string length (power optimizers)

Max. string length (power optimizers)

Max. DC power per string

20,000 W

*1 The maimum power of PV module at STC shall NOT exceed the “Rated input DC power” of MERC-1100/1300W-P. PV Modules with up to ±10% power tolerance are allowed.

*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.

*3 When the MERC-1100/1300W-P is disconnected from inverter or when the inverter is off, its output voltage will become 1 V

*4 It is for PV module frame/extruded aluminum profile racking system installation.

*5 Pay attention to the PV module wire length. To match PV modules with a split junction box and short output wire, the long-input-cable version (input wire: 1.3 m (+/-); output wire: 0.1m (+)/2.9m (-)) of MERC-1100/1300W-P is available upon request.

*6 When the operating temperature of the MERC-1100/1300W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without causing any damage.

*7 Each PV module under the same inverter must be equipped with a MERC-1100/1300W-P.

*8 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy/PV Controller

*9 It is recommended that strings under the same inverter have an equal capacity. If this is not feasible, the capacity difference between strings under the same inverter must not exceed 2 kW. Otherwise, the energy yield will be reduced.

*10 Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.

Smart Module Optimizer Specs_Power Optimizer Specs | Huawei FusionSolar

Smart Module Controller