Сравнение на продукти
SmartDesign 2.0
SmartPVMS
Изтегляне на приложението FusionSolar
Намиране на инсталатор
Намиране на дистрибутор
Общност на инсталаторите
Успешни истории
Зала за онлайн преживявания
Представяне на партньора
Партньор на Power-Partner
Power-Marketing
Станете партньор
Онлайн чат
Гореща линия за обсужване
Запитване за гаранция
Създаване на заявка за услуга
Документ за продукта
СМАРТ ЕНЕРГИЕН КОНТРОЛЕР
Installation Video
FAQ
Perform disconnection detection on optimizers and locate the disconnected ones.
Method 1: Disconnection Detection on the FusionSolar App >
Method 2: Disconnection Detection on the WebUI of the FusionSolar SmartPVMS >
Method 3: Disconnection Detection on the Local Device Commissioning Screen >
When the output is disconnected or the inverter shuts down, the optimizer can adjust the module output voltage to a safe range to ensure the safety of the construction and O&M personnel as well as firefighters.
Method 1: Turn off the AC switch between the inverter and the power grid. >
Method 2: Turn off the DC switch on the inverter. >
Method 3: Connect a switch to the DI and GND ports of the inverter to form a circuit. (For details about which DI port is used, see the corresponding inverter user manual.) The switch is turned on by default. Turn off the switch to trigger a rapid shutdown. >
Replacing an Optimizer (on the FusionSolar App) >
Replacing an Optimizer (on the Local Device Commissioning Screen) >
Checking the PV string resistance >
Disconnection Detection
Rapid Shutdown
Replacing an Optimizer
Checking the PV string resistance
Общност
Научете повече
Инструменти за проектиране