C&I Hybrid Cooling
Energy Storage System
Model: LUNA2000-215 Series
*Currently, only the 215 kWh400 V low-voltage model is available, and only the on-grid solution is supported.
*Currently, only the 215 kWh400 V low-voltage model is available, and only the on-grid solution is supported.
Unlock On-demand Energy,
Keep
All-time Safety
Inherently Safe,
All-time Safety
Huawei proposes the concept of "C2C Dual-link Safety architecture", that is electrical and thermal safety from cell, pack, system, to consumption. Such a comprehensive design ensures safety from products to applications and sets a new benchmark for C&I ESS safety.
C2C Electrical-link Safety: Short circuit
prevention and isolation
The electrical safety is rigorously guaranteed with protection at every level, preventing short circuits.
-
Cell-level
Dual DetectionDetection of 13+ fault types and cloud-based risk warning
-
Six-side
pack insulationPatented reinforced insulation materials are used to provide 6-side all-round protection for battery packs and internal cells to survive 30 days of corrosion by electrolyte and 1500 V voltage
-
Five-level
system protectionFive-level full-range overcurrent protection, covering the AC/DC protection blind spot. Unique cell-to-ground short-circuit protection, rapid shutdown within 5ms.
-
24-hour consumption assurance
24-hour real-time triple RCD, preventing personnel injury.Rapid shutdown of PCS in case of external short circuit to prevent personnel injury and internal components.
C2C Heat-link Safety: Thermal runaway
suppression and protection
An active protection system provides full protection at all levels to ensure the safety of assets, property, and people.
-
Cell heat insulation and cooling
Inter-cell heat insulation and rapid liquid cooling, preventing thermal diffusion between cells.
-
Pack positive pressure oxygen barrier
IP65 protection, prevent oxygen from entering the battery pack and prevent fire inside the battery pack.
-
System-level Fire
ProtectionThe combustible gases are exhausted through a L-shaped duct to prevent combustion and explosion inside the cabinet.
-
Consumption top explosion vent
Hourly fire resistance for assets safety.The top explosion vent design for personal safety.
Pro in Thermal Control
LUNA2000-215 Series are innovating on the thermal control side with an intelligent hybrid cooling architecture. It's all about optimizing temperature, cutting energy use, and making your energy storage system last longer and work better.
91.3%
Higher system efficiency@0.25C
Intelligent Switching Between Multiple Modes
The "Thermal Router" features an advanced thermal management system for adaptive regulation and multi-mode switching based on ambient temperature conditions, similar to how the body regulates heart rate. 30% reduction in energy consumption
-
High temperature
Active liquid cooling mode
The liquid-cooled unit runs actively, low-temperature coolant to quickly cool the cells.The air-cooled module runs in parallel medium-temperature coolant to cool the PCS -
Room Temperature
Natural air cooling mode
Only the air-cooled module runs. Medium-temperature coolant to cool the cells & PCS, lower power consumption -
Low temperature
Waste heat utilization mode
Recycling PCS waste heat, heating the cold cells, extremely low power consumption
Longer Performance Life, More Reliable Operation
Achieve efficient thermal management through the optimization of heat dissipation. This entails different temperature zones design, ultra-low flow resistance path, and dual-loop convection cooling for cells. Our system promises a longer performance lifespan following the strategy of 2 charge/discharge cycles per day.
More Energy
Each battery pack has a built-in energy optimizer 2.0 with an efficient bidirectional balancing topology to improve system efficiency and achieve real-time active balancing without charge and discharge restrictions. This overcomes the short-board effect and increases the usable energy by 2% in the lifecycle.
2%
Increase in Life Cycle DischargeInstall Easier, Cost Lower
Organize the cabinets with our space-saving three-sided layout, cutting the front-to-back spacing to 30 cm. This integrated design enables a swift, effortless, cost-effective setup without extra wiring or trench digging during installation.
Three-phase four-wire PCS, no need for an isolation transformer.10-year free coolant replacement, save operation and maintenance cost
One Management for All Lifecycle, Efficient Design and Operation
Smart design: SmartDesign 2.0, optimal solution design within 1 minute, and hour-level precise benefit analysis.
Smart scheduling: SmartEMO 2.0, the prediction precision is ≥ 90%, increasing the comprehensive revenue by 10%.
Smart O&M: Four-level monitoring from cell level to system. Online health diagnosis, locating of abnormal cells in seconds.
Recommendations
- Theoretical values from Huawei's internal laboratories in specific test environments,
and may vary slightly due to differences in products, software versions, use conditions, and environmental factors.