Ürün Karşılaştırma
SmartDesign 2.0
SmartPVMS
FusionSolar Uygulamasını İndir
Bir Distribütör Bul
Kurulumcu Topluluğu
Başarı Hikâyeleri
Kurulumcular Topluluğu
Çevrimiçi Deneyim Merkezi
İş Ortağı Tanıtımı
Güç-İş Ortağı
Güç-Pazarlama
İş Ortağı Olun
Çevrimiçi Sohbet
Servis Danışma Hattı
Garanti Sorgulama
Yedek Parça Sorgulama
Ürün Belgesi
Huawei Dijital Güç
Akıllı Enerji Denetleyicisi
Kurulum Videosu
SSS
Perform disconnection detection on optimizers and locate the disconnected ones.
Method 1: Disconnection Detection on the FusionSolar App >
Method 2: Disconnection Detection on the WebUI of the FusionSolar SmartPVMS >
Method 3: Disconnection Detection on the Local Device Commissioning Screen >
When the output is disconnected or the inverter shuts down, the optimizer can adjust the module output voltage to a safe range to ensure the safety of the construction and O&M personnel as well as firefighters.
Method 1: Turn off the AC switch between the inverter and the power grid. >
Method 2: Turn off the DC switch on the inverter. >
Method 3: Connect a switch to the DI and GND ports of the inverter to form a circuit. (For details about which DI port is used, see the corresponding inverter user manual.) The switch is turned on by default. Turn off the switch to trigger a rapid shutdown. >
Replacing an Optimizer (on the FusionSolar App) >
Replacing an Optimizer (on the Local Device Commissioning Screen) >
Checking the PV string resistance >
Disconnection Detection
Rapid Shutdown
Replacing an Optimizer
Checking the PV string resistance
Topluluk
Daha Fazla Bilgi Edinin
Tasarım Araçları