Smart String Energy Storage System User Guide

LUNA2000-5/10/15-S0

Smart String Energy Storage System

LUNA2000-5/10/15-S0

แผ่นข้อมูล 6.2 MB

คู่มือการใช้งาน 9.34 MB

Quick Guide 4.73 MB

ดาวน์โหลดเพิ่มเติม

วิดีโอการติดตั้ง

FAQs

How Do I Replace a Fuse
SOC Change Description
Checking Cable Connection when the Battery Fails to Be Upgraded
Delayed Upgrade Description
How Do I Recycle Used Batteries

How Do I Replace a Fuse

Replacement background: When the SUN2000 is faulty, the Battery fuse is likely to be damaged. In this case, check whether the fuse is open-circuited and replace it.

Step 1 Power off the system. For details, see System Power-Off.  >

Step 2 Loosen the screws on the fuse shell.  >

Step 3 Lift the fuse box opening, remove the fuse, insert a new fuse into the slot, and close the fuse box. If you hear a click sound and the bulge on the side is inside the box, the fuse box is properly installed.  >
SOC Change Description

1. How does the SOC change from 99% to 100% when the battery is about to be fully charged?
When the SOC is greater than 99%, the battery switches to float charging and the charging current decreases gradually. Finally, the SOC reaches 100%.

2. When the battery temperature is low, the charging power is displayed as about 300 W, but the SOC does not change. Why?
When the internal temperature of the battery module is low, the internal heating component starts to heat the battery. The heating power is 300 W (typical value). When the heating component is working, the battery is not charged and the SOC does not change. Battery heating helps to keep the cell at a proper operating temperature and prolong the service life of the product.
Checking Cable Connection when the Battery Fails to Be Upgraded

If the battery fails to be upgraded, check the cable connections by referring to Electrical Connection. If the upgrade fails, reconnect the cables correctly and perform the upgrade again.
Delayed Upgrade Description

After logging in to the inverter, if the FusionSolar app detects that the LUNA2000 firmware version is outdated, the app prompts you to upgrade the LUNA2000. You can choose immediate activation or delayed activation. If you choose immediate activation, the LUNA will be upgraded immediately after the firmware package is uploaded. The upgrade process takes approximately 30 minutes. If you choose delayed activation, the activation of the firmware will be performed four hours after you log out of the app.
How Do I Recycle Used Batteries?

NOTICE

- The Company does not recycle batteries. Contact local recycling agencies to handle batteries.
- If there are no such agencies in your area, you can contact the nearest foreign recycling agencies.

Step 1 Contact the nearest recycling agency.

Step 2 Recycling agencies assess the costs.

Step 3 Recycling agencies carry out recycling, which can be done in two ways: >

Step 4 Recycling companies handle recycling. The recycled lithium batteries are at the disposal of the recycling companies.

How Do I Replace a Fuse?

Replacement background: When the SUN2000 is faulty, the Battery fuse is likely to be damaged. In this case, check whether the fuse is open-circuited and replace it.

Step 1 Power off the system. For details, see System Power-Off. >

Step 2 Loosen the screws on the fuse shell.

Step 3 Lift the fuse box opening, remove the fuse, insert a new fuse into the slot, and close the fuse box. If you hear a click sound and the bulge on the side is inside the box, the fuse box is properly installed. >
SOC Change Description

1. How does the SOC change from 99% to 100% when the battery is about to be fully charged?
When the SOC is greater than 99%, the battery switches to float charging and the charging current decreases gradually. Finally, the SOC reaches 100%.

2. When the battery temperature is low, the charging power is displayed as about 300 W, but the SOC does not change. Why?
When the internal temperature of the battery module is low, the internal heating component starts to heat the battery. The heating power is 300 W (typical value). When the heating component is working, the battery is not charged and the SOC does not change. Battery heating helps to keep the cell at a proper operating temperature and prolong the service life of the product.
Checking Cable Connection when the Battery Fails to Be Upgraded

If the battery fails to be upgraded, check the cable connections by referring to Electrical Connection. If the upgrade fails, reconnect the cables correctly and perform the upgrade again.
Delayed Upgrade Description

After logging in to the inverter, if the FusionSolar app detects that the LUNA2000 firmware version is outdated, the app prompts you to upgrade the LUNA2000. You can choose immediate activation or delayed activation. If you choose immediate activation, the LUNA will be upgraded immediately after the firmware package is uploaded. The upgrade process takes approximately 30 minutes. If you choose delayed activation, the activation of the firmware will be performed four hours after you log out of the app.
How Do I Recycle Used Batteries?

NOTICE

The Company does not recycle batteries. Contact local recycling agencies to handle batteries.
If there are no such agencies in your area, you can contact the nearest foreign recycling agencies.

Step 1 Contact the nearest recycling agency.

Step 2 Recycling agencies assess the costs.

Step 3 Recycling agencies carry out recycling, which can be done in two ways >

Step 4 Recycling companies handle recycling. The recycled lithium batteries are at the disposal of the recycling companies.

ชุมชน

เรียนรู้เพิ่มเติม

Smart Design

เรียนรู้เพิ่มเติม

Power-Marketing

เอกสารผลิตภัณฑ์

ชุมชน

การสนับสนุนทางออนไลน์

How Do I Replace a Fuse

SOC Change Description

Checking Cable Connection when the Battery Fails to Be Upgraded

Delayed Upgrade Description

How Do I Recycle Used Batteries?