Smart Module Optimizer Specs_Power Optimizer Specs

SUN2000-450W-P2 / SUN2000-600W-P

Smart Module Controller

SUN2000-450W-P2/SUN2000-600W-P

Smart Module Controller

Technical Specification SUN2000-450W-P2 SUN2000-600W-P

Input

Rated input DC power¹ 450 w 600 w

Absolute max. input voltage 80 v

MPPT operating voltage range 10 - 80 V

Max. short-circuit current (Isc) 14.5 A

Max. efficiency 99.5%

Weighted efficiency 99.0%

Overvoltage category ||

Output

Max. output voltage 80 v

Max. output current 15 A

Output bypass ² Yes

Output voltage during standby³ 0 v

Output impedance during standby 1 kΩ ± 10%

Communication

Communication protocol MBUS

Standards Compliance

Safety IEC62109-1 (class II safety)

RoHS Yes

Fire Safety VDE-AR-E 2100-712:2018-12

General Specifications

Dimensions (W x H x D) 75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.)

Weight (including cables) 0.6 kg (1.3 lb.)

Installation kit (optional) Frame mounting bracket / T-shaped bolt⁴

Input connector Staubli MC4

Input wire length 0.15 m (0.49 ft.)

Output connector Staubli MC4

Output wire length 1.3 m (4.3 ft.)

Operating temperature / humidity range -40 °C to +85 °C ⁵ /0% - 100%

IP rating IP68

Compatible inverters SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0, SUN2000-5/6/8/10/12K-MAP0 SUN2000-12K/15K/17K/20K/25K-MB0, SUN2000-8K/10K-LC0, SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5, SUN2000-30K/36K/40K-M3

PV System Design⁶ SUN2000-2~6KTL-L1 SUN2000-8K/10K-LC0 SUN5000-17/25K-MB0 SUN5000-8/12K-MAP0 SUN2000-3~10KTL-M1 SUN2000-5/6/8/10/12K-MAP0 SUN2000-12~25KTL-M5 SUN2000-12~25K-MB0 SUN2000-30K/36K/40K-M3

Min. string length (power optimizers) 4 4 6 6 6 6 6 6 6

Max. string length (power optimizers) 25 25 35 35 35 35 35 35 25

Max. DC power per string 6000 W 6000 W 12,000 W 12,000 W 10,000 W 12,000 W 12,000 W 12,000 W 12,000 W

*1 The maximum power of PV module at STC shall NOT exceed the “Rated Input DC Power” of the power optimizer. PV modules with up to +5% power tolerance are allowed.

*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.

*3 Once the power optimizer stops working, its output voltage is reduced to 0 V.

*4 It is for PV module frame/extruded aluminum profile racking system installation.

*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without causing any damage.

*6 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy / PV Controller

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.