SUN2000-12/15/17/20/25KTL-M5

Smart Energy Controller

SUN2000-12/15/17/20/25KTL-M5

Smart Energy Controller
Smart Energy Controller
Smart Energy Controller
Smart Energy Controller

Smart Energy Controller

Technical Specification SUN2000 -12KTL-M5 SUN2000 -15KTL-M5 SUN2000 -17KTL-M5 SUN2000 -20KTL-M5 SUN2000 -25KTL-M5
Efficiency specs-icon
Max. efficiency 98.4% 98.4% 98.4% 98.4% 98.4%
European weighted efficiency 97.9% 98.0% 98.1% 98.1% 98.2%
Input specs-icon
Recommended max. PV power1 18,000 Wp 22,500 Wp 25,500 Wp 30,000 Wp 37,500 Wp
Max. input voltage2 1100 V
Full-load MPPT voltage range 370 V ~ 800 V 410 V ~ 800 V 440 V ~ 800 V 480 V ~ 800 V 530 ~ 800 V
MPPT operating voltage range3 200 V ~ 1000 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 30 A (two string) / 20 A (single string)
Max. short-circuit current 40 A
Number of MPP trackers 2
Max. number of inputs 4
Output specs-icon
Grid connection Three phase
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W 25,000 W
Max. apparent power 13,200 VA 16,500 VA 18,700 VA 22,000 VA 27,500 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 239.6 Vac / 415Vac, 3 W + N + PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 18.2 A / 380 Vac
17.3 A / 400 Vac
16.7 A / 415 Vac
25.2 A / 380 Vac
23.9 A / 400 Vac
23.1 A / 415 Vac
28.6 A / 380 Vac
27.1 A / 400 Vac
26.1 A / 415 Vac
33.6 A / 380 Vac
31.9 A / 400 Vac
30.8 A / 415 Vac
42.0 A / 380 Vac
39.9 A / 400 Vac
38.5 A / 415 Vac
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3 %
Features & Protections specs-icon
Overvoltage category PV Ⅱ / AC Ⅲ
Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
DC reverse-polarity protection Yes
String fault detection Yes
DC surge protection TYPE II
AC surge protection CLASS II
Residual current monitoring unit Yes
Arc fault protection Yes
Ripple control ripple control Yes
Integrated PID recovery4 Yes
General Data specs-icon
Operation temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative humidity 0% RH ~ 100% RH
Max. operating altitude 0 ~ 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Smart air cooling
Display LED Indicators; Integrated WLAN + FusionSolar App
Communication RS485; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (with mounting plate) 21 kg (46.4 lb)
Dimensions (W x H x D)
(incl. mounting plate)
546 x 460 x 228 mm (21.5 x 18.1 x 9.0 inch)
Degree of protection IP66
Optimizer Compatibility specs-icon
Compatible optimizer SUN2000-450W-P2, SUN2000-600W-P, MERC-1100W-P, MERC-1300W-P
Standard Compliance (More Available Upon Request) specs-icon
Certificates EN/IEC 62109-1, EN/IEC 62109-2
Grid connection standards G99, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, C10/11, ABNT, VFR 2019, UNE 217001, UNE 217002, RD 244, TOR D4,
IEC61727, IEC62116

*1 Inverter max input PV power is 40,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.

*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.

*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.

*4 SUN2000-12~25KTL-M5 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly).