SUN2000-150K-MG0
Smart PV Controller
SUN2000-150K-MG0
Smart PV Controller
Technical Specification
SUN2000-150K-MG0
Efficiency
Max. efficiency
98.6% @400V, 98.8% @480V
European efficiency
98.4%
Input
Max. Input Voltage1
1,100 V
Max. Current per MPPT
48 A
Max. Current per Input
23 A
Max. Short Circuit Current per MPPT
66 A
Start Voltage
200 V
MPPT Operating Voltage Range2
200 V ~ 1,000 V
Number of MPP trackers
7
Max. input number per MPP tracker
3
Output
Nominal AC Active Power
150,000 W
Max. AC Apparent Power
165,000 VA
Max. AC Active Power (cosφ=1)
165,000 W
Nominal Output Voltage
380 V/400 V/480 Vac
Rated AC Grid Frequency
50 Hz / 60 Hz
Nominal Output Current
227.9 A @380 V, 216.5 A @400 V, 180.4 A @480 Vac
Max. Output Current
253.2 A @380 V, 240.5 A @400 V, 200.5 A @480 Vac
Adjustable Power Factor Range
0.8 leading... 0.8 lagging
Alternating current THDi
＜1%
Protection
Anti-islanding Protection
Yes
AC Overcurrent Protection
Yes
DC Reverse-polarity Protection
Yes
PV-array String Fault Monitoring
Yes
DC Surge Arrester
Type II
AC Surge Arrester
Type II
DC Insulation Resistance Detection
Yes
Residual Current Monitoring Unit
Yes
Smart String Level Disconnector
Yes
Arc Fault Protection
Yes
Terminal Temperature Detection
Yes
PID Recovery
Yes
PV Ground-Fault Protection
Yes
Communication
Display
LED indicators; WLAN adaptor + FusionSolar APP
RS485
Yes
USB
Yes
Smart Dongle-4G
Smart Dongle – 4G / WLAN (Optional)
Monitoring BUS (MBUS)
Yes (isolation transformer required)
General Data
Dimensions (W x H x D)
1,000 x 710 x 395 mm
Weight (with mounting plate)
102 kg
Operating Temperature Range
-25°C ~ 60°C
Cooling Method
Smart Air Cooling
Max. Operating Altitude
4,000 m (13,123 ft.)
Relative Humidity
0 ~ 100%
DC Connector
Amphenol HH4
AC Connector
Waterproof Connector + OT/DT Terminal
Protection Degree
IP66
Topology
Transformerless
Standard Compliance (more available upon request)
Certificate
EN 62109-1/-2, IEC 62109-1/-2, IEC 62116, IEC 61727, IEC 60068, IEC 61683
Grid Connection Standards
VDE-AR-N4105, EN 50549-1, EN 50549-2, RD 661, RD 1699, C10/11
* 1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
* 2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.