SUN2000-450W-P2 / SUN2000-600W-P

Smart Module Controller

SUN2000-450W-P2/SUN2000-600W-P

Smart Module Controller
Smart Module Controller
Smart Module Controller
Smart Module Controller
Smart Module Controller
Smart Module Controller

Smart Module Controller

Details SUN2000-450W-P2 SUN2000-600W-P
Input specs-icon
Rated Input DC power1 450w 600w
Absolute max. input voltage 80v
MPPT operating voltage range 10-80V
Max. short-circuit current (Isc) 14.5A
Max. efficiency 99.5%
Weighted efficiency 99.0%
Overvoltage category ||
Output specs-icon
Max. output voltage 80v
Max. output current 15A
Output bypass 2 Yes
Output voltage during standby3 0v
Output impedance during standby 1kΩ ± 10%
Communication specs-icon
Communication protocol MBUS
Standard Compliance specs-icon
Safety IEC62109-1 (class II safety)
RoHS Yes
Fire Safety VDE-AR-E 2100-712:2018-12
General Specifications specs-icon
Dimensions (W x H x D) 75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.)
Weight (including cables) 0.6 kg (1.3 lb.)
Installation part (optional) Frame mounting bracket / T-shaped bolt4
Input connector Staubli MC4
Input wire length 0.15 m (0.49 ft.)
Output connector Staubli MC4
Output wire length 1.3 m (4.3 ft.)
Operating temperature / humidity range -40℃ to +85℃5 / 0%-100%
IP rating IP68
Compatible inverters SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/4/5/6/8/10KTL-M1,
SUN2000-8/10/12/15/17/20KTL-M2, SUN2000-12/15/17/20/25KTL-M5, SUN2000-30/36/40KTL-M3
PV System Design6 SUN2000-2~6KTL-L1 SUN2000-3~10KTL-M1 SUN2000-8~20KTL-M2
SUN2000-12~25KTL-M5
SUN2000-30~40KTL-M3
Min. string length (power optimizers) 4 6 6 6
Max. string length (power optimizers) 25 35 35 25
Max. DC power per string 6,000 W 10,000 W 12,000 W 12,000 W

*1 The maximum power of PV module at STC shall NOT exceed the "Rated Input DC Power" of the power optimizer. PV modules with up to +5% power tolerance are allowed.

*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.

*3 Once the power optimizer stops working, its output voltage is reduced to 0 V.

*4 It is for PV module frame/extruded aluminum profile racking system installation.

*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without causing any damage.

*6 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy/PV Controller.