Power-M-5/10/15/20/25/30 Specs | Smart Energy Storage System

Power-M

Power-M-5/10/15/20/25/30

Power-M-5/10/15/20/25/30

Technical Specification Power-M-5/10/15/20/25/30

System Specifications

Power module iSitePower-M-MAP05A1

Output / Input power per module 2.5 kW

Battery module iSitePower-M-MAB05B1

Battery module capacity 5 kWh

Number of power modules 1

Number of battery modules 1 2 3 4 5 6

Battery usable capacity¹ 5 kWh 10 kWh 15 kWh 20 kWh 25 kWh 30 kWh

Max. output power 2.5kW 5 kW 5 kW 5 kW 5 kW 5 kW

Communication

Display SOC statusindicator

Communication CAN (for parallel communications between power modules, between battery modules and power modules, and between battery modules); WLAN/FE/4G (for connecting to the SmartPVMS)

General Specification

Power module dimension (W x H x D) 700 mm x 246 mm x 152 mm

Power module weight 17 kg

Battery module dimension (W x H x D) 700 mm x 390 mm x 158 mm

Battery module weight 50 kg

Base dimension (W x H x D) 700 mm x 65 mm x 147 mm (floor installation)
643 mm x 110 mm x 176 mm (wall-mounted installation)

Base weight 1.5 kg (floor installation)
5.5 kg (wall-mounted installation)

Installation mode Wall-mounted/Floor-mounted

IP rating IP66

Cell technology Lithium-iron phosphate (LiFePO4)

AC Input

Input voltage 200 / 208 / 220 / 230 / 240 Vac

Input current Max. 30 A

Frequency 50 / 60 Hz

Maximum bypassinput power 6 kW

Lightning protection Differential mode (between live and neutral): 3 kA; 8 / 20 μs
Common mode (between live or neutral and PE, between live / neutral pair and PE): 5 KA; 8 / 20 μs

PV Input

MPPT voltage range 90 ~ 420 Vdc

Maximum input capacity of the MPPT 5.5 kWp

PV string quantity 2 strings

Number of MPPT channels 1 channel

Maximum input current for one string 12.5 A

Maximum short circuit current perstring 18 A

Lightning protection Common mode (between PV+ / PV- pair and PE): ±10 KA; 8 / 20 μs

AC Output

Output Single-phase 200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac

Output frequency 50 / 60 Hz. The default value is 50 Hz.

Maximum output current 30 A

Output power 6 kVA / 5 kW

Power factor 0.8

Overload Capacity

102% ≤ Load ≤ 125% 30s

125% < Load ≤ 150% 10s

>150% / short circuit 0.3s

AC Parallel Box

Dimensions (W * H * D) 350 mm x 450 mm x 150 mm

Weight Approx. 12 kg

Input voltage 200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac.

Input current Max. 90 A

Output voltage 200 / 208 / 220 / 230 / 240 Vac. The default value is 220 Vac.

Output current Max. 90 A

Cable outlet mode Bottom in and bottom out

Installation mode Wall-mounted or pole-mounted installation

IP rating IP55

Environmental Parameters

Operating temperature 0 °C to 45 °C

Relative humidity 5% ~ 95% (RH)

Operating altitude 0 - 4000 m (The operating temperature decreases by 1 °C per 200 m when the altitude is 2000 m to 4000 m)

Standards Compliance

Certifications IEC62920: 2017, CISPR11: 2015+A1: 2016/EN55011: 2016+A1: 2017, EN62040-2, ETSI EN 301 489-1, ETSI EN 301 489-17, IEC61000-3, IEC 62619, IEC 62109-1, IEC 62109-2, RoHS, EN 50385, RCM, UKCA, ICE 60730, UN38.3

*1 Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25 °C, at the beginningof life. If no PV modules are installed or the system has not detected sunlight for at least 24 hours, the minimum end-of-discharge SOC is 15%.

*2. The weight of the battery module is subject to the actual product, with a tolerance of ±3%.

*3. Refer to battery warranty letter for conditional application.

*4. Improper storage system installation may compromise product warranty and operation safety. Please follow the user manual during the installation, use, and maintenance of the storage system.

Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.