SUN2000-50KTL-M3
SUN2000-50KTL-M3
SUN2000-50KTL-M3
Technical Specification
SUN2000-50KTL-M3
Efficiency
Max. efficiency
98.5%
European efficiency
98.0%
Input
Max. input voltage 1
1,100 V
Max. current per MPPT
30 A
Max. current per input
20 A
Max. short circuit current per MPPT
40 A
Start voltage
200 V
MPPT operating voltage range 2
200 V ~ 1,000 V
Rated input voltage
600 V
Number of inputs
8
Number of MPP trackers
4
Output
Rated AC active power
50,000 W
Max. AC apparent power
55,000 VA
Max. AC active power (cosφ=1)
55,000 W
Rated output voltage
400 Vac / 480 Vac, 3W+(N) + PE
Rated AC grid frequency
50 Hz / 60 Hz
Rated output current
72.2 A @ 400Vac, 60.1 A @ 480Vac
Max. output current
79.8 A @ 400Vac, 66.5 A @ 480Vac
Adjustable power factor range
0.8 LG ... 0.8 LD
Max. total harmonic distortion
<3%
Protection
Input-side disconnection device
Yes
Anti-islanding protection
Yes
AC overcurrent protection
Yes
DC reverse-polarity protection
Yes
PV-array string fault monitoring
Yes
DC surge arrester
Type II
AC surge arrester
Type II
DC insulation resistance detection
Yes
Residual current monitoring unit
Yes
Arc fault protection
Yes
Ripple receiver control
Yes
Integrated PID recovery 3
Yes
Communication
Display
LED Indicators, WLAN + APP
RS485
Yes
Smart dongle
WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
4G / 3G / 2G via Smart Dongle-4G (Optional)
4G / 3G / 2G via Smart Dongle-4G (Optional)
Monitoring BUS (MBUS)
Yes (Isolation Transformer required)
Optimizer Compatibility
DC MBUS compatible optimizer 4
MERC-1100/1300W-P
General Data
Dimensions (W x H x D)
640 x 530 x 270 mm (25.2 x 20.9 x 10.6 inch)
Weight (with mounting plate)
49 kg (108.1 lb)
Operating temperature range
-25 °C ~ 60 °C (-13 °F ~ 140 °F)
Cooling method
Smart Air Cooling
Max. operating altitude
4,000 m (13,123 ft.)
Relative humidity
0% RH ~ 100% RH
DC connector
Amphenol HH4
AC connector
Waterproof Connector + OT/DT Terminal
Protection degree
IP 66
Topology
Transformerless
Nighttime power consumption
≤ 5.5W
Standard Compliance (More Available Upon Request)
Safety
EN 62109-1/-2, IEC 62109-1/-2, IEC 62116, IEC 60068, IEC 61683
Grid connection standards
IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
P.O. 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7,
NRS 097-2-1, DEWA
P.O. 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7,
NRS 097-2-1, DEWA
1. The maximuminput voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
2. Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
3. SUN2000-50KTL-M3 raises potential between PV- and ground to above zero through integratedPID recovery functionto recover module degradation from PID. Supported module types include: P-type (mono, poly), N-type (nPERT, HIT)