SUN2000-5/6/8/10/12K-MAP0
SMART ENERGY CONTROLLER
SUN2000-5/6/8/10/12K-MAP0
SMART ENERGY CONTROLLER
Technical Specification
SUN2000
-5K-MAP0
SUN2000
-6K-MAP0
SUN2000
-8K-MAP0
SUN2000
-10K-MAP0
SUN2000
-12K-MAP0
Efficiency
Max. efficiency
98.4%
98.6%
98.6%
98.6%
98.6%
European weighted efficiency
97.5%
97.7%
98.0%
98.1%
98.2%
Input (PV)
Recommended max. PV power1
9000 Wp
11,000 Wp
14,600 Wp
18,000 Wp
22,000 Wp
Max. input voltage2
1100 V
Operating voltage range 3
160 - 1000 V
Startup voltage
160 V
Rated input voltage
600 V
Max. input current per MPPT
16 A
Max. short-circuit current
22 A
Number of MPP trackers
2
Max. input per MPP tracker
1
Input (DC Battery)
Compatible battery
LUNA2000-5/10/15-S0 / LUNA2000-7/14/21-S1
Operating voltage range
600 - 980 V
Max. operating current
20 A
Max. charging power
5500 W
6600 W
8800 W
11,000 W
12,000 W
Output (On Grid)
Grid connection
Three-phase
Rated output power
5000 W
6000 W
8000 W
10,000 W
12,000 W
Max. apparent power
5500 W
6600 W
8800 W
11,000 W
13,200 W
Rated output voltage
220 V AC / 380 V AC, 230 V AC / 400 V AC, 240 V AC / 415 V AC 3 W/N + PE
Rated AC grid frequency
50 Hz / 60 Hz
Max. output current
8.3 A
10.0 A
13.3 A
16.7 A
20.2 A
Adjustable power factor
0.8 leading ... 0.8 lagging
Max. total harmonic distortion
≤ 3%
Output (Off Grid)
Compatible backup device
SmartGuard-63A-T0 (3 phase)
Rated output power
5000 W
6000 W
8000 W
10,000 W
12,000 W
Rated output voltage
220 V AC / 380 V AC, 230 V AC / 400 V AC, 240 V AC / 415 V AC 3 W/N + PE
110% overload
Continuous
150% overload
5 min (3-phase) / 5 min (Single-phase)
1 min (3-phase) / 5 min (Single-phase)
200% overload
10 seconds
Automatic switchover time
≤ 20 ms (with SmartGuard-63A-T0)
Protection Feature
Asymmetric load
Yes, supports 100% three-phase asymmetric load
Input-side disconnection device
Yes
Anti-islanding protection
Yes
DC reverse polarity protection
Yes
Insulation detection
Yes
DC surge protection
Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection
Yes, compatible with TYPE II protection class according to EN/IEC
61643-11
Residual current detection
Yes
AC overcurrent protection
Yes
AC short-circuit protection
Yes
AC overvoltage protection
Yes
Arc fault protection
Yes
Connector temperature detection
Yes (PV & Battery connectors)
Ripple receiver control
Yes
Battery charging from grid
Yes
General Specification
Operating temperature range
-25 °C to +60 °C (-13 °F to +140 °F)
Relative operating humidity
0% - 100% RH
Max. operating altitude
4000 m
Cooling
Natural convection
Noise
≤ 29 dB
Display
LED Indicators; Integrated WLAN + FusionSolar APP
Communication
RS485; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
4G/3G/2G via Smart Dongle-4G (Optional); EMMA (Optional)
4G/3G/2G via Smart Dongle-4G (Optional); EMMA (Optional)
Weight (incl. mounting brackets)
21 kg
Dimensions (incl. mounting
brackets)
490 mm x 460 mm x 130 mm
IP rating
IP66
Nighttime power
< 5.5 W
Optimizer Compatibility
DC MBUS compatible optimizer
SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety
EN/IEC62109-1, EN/IEC62109-2
Grid connection standards
IEC61727, IEC62116, MEA/PEA, G99, IRR-DCC-MV/IRR-TIC, Philippine Grid Code Resolution No. 07, NRS 097-2-
1, EN50549-1, VDE4105, UTE15-712-1/VFR 2019, UNE217002, NTS631, RD244(UNE217001), PPDS, ROGA, TOR
Erzeuger, CEI 0-21:2020-12 V1, CEI-016, C10/C11
*1 The max. input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.
Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.